Build your Phinisi boat a traditional wooden sailing vessel in indonesia

The boat builders commonly known lump under the category of Bugis people, however you need to know that there are four sub cultural category of boat builders distinguished in south sulawesi refer to article of Host Libner and Michael Karsten. The primary group are the Konjo of the southern part of south Sulawesi based in Tana Beru small district near Ara village and Bira Beach, the Mandar in north of Makassar , the Bugis from the small region near Wajo on the south eastern of Bone gulf   ( the central gulf between the two halves of Sulawesi, and Makassarese from the region around the city of Makassar. Among these talented groups, the Konjo group of south Sulawesi appear the primary and most influential role as boat builders.

Technically the term pinisi refer to the rig itself. In particular ‘pinisi refer to the usual gaff ketchtype of rig. Locally rig is referred to as “ seven sail schooner”  eventhough the aft gaff sail is slightly smaller than the forward gaff sail in fact making it ketch rig.
Per Horst Liebner, the correct term for the sharp-stern sailing craft is 'palari' or 'lamba' among the Konjo boat builders of South Sulawesi. When the stem and stern post are straight, and are set at a sharply raked angle to the keel, the hull form is the 'lamba' as opposed to the 'palari' which make use of curved timbers for both stem and stern.  Since the term 'Pinisi' has come to be commonly applied to the hull form as well, we will use the word 'Pinisi' here to refer to the sailing hull type for the purposes of our discussion
These 'Pinisi' have traditionally been built in a variety of sizes. Although in the past the craft tended to be smaller, it is not uncommon to find 30 to 40 meter vessels under construction, with an occasional Pinisi ranging up to around 50 meters (close to 165 feet on deck) or larger. The widespread use of a sharply raked stem and stern post is simply the practical result of making efficient use of the timber lengths that can be conveniently brought down from the forest. In this way the vessel can be quite large and still have a relatively modest length of keel timber. Conveniently, it also makes them very good sea boats!

In many Indonesian boat building locations, good timber has become difficult to obtain, therefore costly. Many builders have begun using shorter and shorter timbers, resulting in a compromised hull structure, particularly in larger craft. With many of the ritual ceremonies becoming less and less common, some may suggest that this too has conspired against the longevity of the ships.

One very significant improvement in the quality of available timber has been made possible by the Konjo builders themselves... The builders of larger vessels have actually re-located! Quite a number of the Konjo builders from Southwest Sulawesi have simply moved, in order to be close to larger supplies of good quality timber.  In so doing, the builders of Southwest Sulawesi have literally carved a new building site and a new village out of the jungle in Kalimantan (Borneo). Several new building sites are located in Kalimantan Selatan (South Kalimantan) and Kalimantan Timur (East Kalimantan), on the banks of rivers close to the supply of timbers. It is here that they have been able to obtain the size and quality of timbers necessary for building wooden vessels of up to 50 or so meters in length.

 Historically, several interesting rituals and ceremonies have been part of building such a vessel, beginning with choosing the right trees for critical parts of the structure. Just as with traditional wooden boat building in the West, various rituals continue throughout the building process to initiate and celebrate each stage, such as the all important laying of the keel.